HF SSB Transceiver
About HF SSB Transceiver
The HF transceiver is a versatile and rugged 1.6 MHz to 30 MHz, 125 W PEP, field proven HF transceiver that can be easily configured to customers’ exact operational requirements.
The HF transceiver provides all common modes of HF transmission, all currently used Selective Call formats, MIL-STD 188-141B Automatic Link Establishment, and a new generation, simple to operate, Frequency Hopping option.
The HF transceiveris housed in a lightweight, extremely strong sealed aluminium chassis, meets MIL- STD 810G for drop, dust, temperature, shock and vibration.
TeamingHF transceiver with other series products provides email, fax, telephone and data connectivity within an HF network and onwards to both the international telephone network and the internet.
General specifications
| Transmit frequency range | 1.6 MHz to 30 MHz (continuous) |
| Channel capacity | Up to 500 programmable channels |
| Frequency stability | ±0.5 ppm (±0.3 ppm optional) |
| Receive frequency range | 250 kHz to 30 MHz (continuous)* |
| Frequency resolution | 1 Hz tunable receiver |
| Frequency stability | ±0.5 ppm (±0.3ppm optional) |
| Operating modes | J3E (USB, LSB) – H3E (AM) – J2A (CW) J2B (AFSK) Optional J2B (AFSK) with narrow filter |
| Operating temperature | -30°C to +70°C humidity 95% relative, non condensing |
| Frequency hopping | 25 or 5 hops per second |
| Supply voltage | 2050 -13.8 V DC (negative ground) polarity protected. Over voltage protected |
| Selcall system | Based on CCIR 493-4, four and six digit systems |
| Current consumption | 470 mA standby (muted, back lighting off) Voice average less than 9 Amps typical Two tone less than 12 Amps typical |
| Sensitivity | -120 dBm (0.224 uV) for 10 dB SINAD – J3E Mode |
| RF output power | 125 W PEP voice ±1.5 dB or 30 W PEP voice ±1.5 dB or 10 W PEP voice ±1.5 dB |
| Duty cycle | 100% two tone input signal with fan option |
| Programming | RS232 |
| Standards | FCC approved – Part 90 Exceeds/complies with Australian/ New Zealand standard AS/NZS 4770:2000 and AS/NZS 4582:1999 EMC and vibration standard IEC 945 Complies with MIL-STD 810G for drop, dust, temperature, shock and vibration NTIA Approved |
