SFP+ and XFP Optical Transceivers

SFP+ based optical transceivers are all fully compliant to 10 G Ethernet based applications covered under IEEE 802.3 ae and IEEE802.3 Aq specifications. Transceivers are offered in SR (850 nm wavelength), LR (1310 nm wavelength) and LRW (1310 nm wavelength) configurations and are ideally suited for network and enterprise transmission applications. Each transceiver has a duplex LC optical interface for the optical cable connection and all transceivers are compliant with Small Form Factor standards SFF-8431, SFF-8432, and SFF-8472. Operating case temperature range is 0°C to 70°C. All transceiver products are fully RoHs 6/6 compliant.

XFP transceivers, all fully compliant to the XFP MSA rev 4.5 standard and support SONET/SDH, Ethernet, FibreChannel, and IEEE 802.3 ba based applications. Transceivers are offered in SR (850 nm wavelength) and LR (1310 nm wavelength) configurations and are well suited for single channel (per I/O port) datacom, storage network, and SONET transmission applications. Each transceiver has a duplex LC optical interface for the optical cable. Both SR and LR configurations feature a hot-pluggable 30 position board side connector interface. Operating case temperature range is 0°C to 70°C. All transceiver products are fully RoHs 6/6 comp

• SFP+ Transceiver
  Features & Benefits:
  0°C to +70°C case operating temperature SFP+ compatible SFI high speed electrical interface Comply with 10 G Ethernet application specifications Digital diagnostic through 2 wire serial interface (SFP+ compatible) Low power consumption at <0.6 W for SR; <0.8 W.for LR and LRM Compliant to SFP+ industry standards SFF-8431, SFF-8432, and SFF-8472	Duplex LC connector RoHs 6/6 compliance Transmission of SR – up to 300 m on OM3 MMF LR – up to 10 km on SMF LRM – up to 220 m on OM1 fiber

• XFP Transceiver
  Features & Benefits:
  0°C to +70°C case operating temperature Compliant to XFP MSA rev 4.5 industry standard Low power consumption at <0.9 W for SR; <1.5 W for LR Hot pluggable 30 position board electrical connector interface Complies with SONET/SDH, Ethernet, FibreChannel, and IEE802.3be standards	Duplex LC connector Transmission of SR – up to 82 m on MMF or 300 m on high bandwidth MMF LR – up to 10 km on SMF