HANDHELD TEST SET
- Bit Error Rate with G.821, G.826 and M2100 measurements for nx64 kbps and 2.048 Mbps circuits. Also measures clock frequency, true instantaneous and cumulative clock slip and wander, as well as signal level and alarms simultaneously in two links.
- Displays received signal pulse shape graphically, superimposed with ITU-T G.703 mask.
- Measures BERT on leased datacom lines with G.703 co-dir, V.35, RS-232 etc. from 50 bps to 2.048 Mbps.
- Measures VF level and frequency, Signal to Noise Ratio and Psophometric noise on any selected channel. Injects tone with variable level and frequency. Also allows a user to talk into any channel and listen to conversation bi-directionally while in-service.
- Bi-directional MFR2C analysis and dialing with timed CAS (ABCD) bits transition and tonal event capture.
- Detailed CCS7 protocol decode of CCS7 (ISUP, TUP, SCCP etc.), GSM (A, Abis.. at 16/64 Kbps).
- Monitors GSM speech and C bits on 13 Kbps TRAU channel in uplink or downlink.
- Dialing/call set up in MFR2C and ISDN
SPECIFICATIONS
Connectors/Ports :2.048 Mbit/s bidirectional E1 interfaces Line 1 Tx, Line 1 Rx, Line 2 Tx, Line 2 Rx75Ωunbalanced BNC
75Ω(optional): Replaces BNC with 1.6/5.6 mm (f)
120Ω(optional): Replaces BNC with BR2 (f), balanced
Serial port: 8-DIN, RS232C (V.24), DTE
Datacom interface: 30 pin HDI (High Density Interface)
connector (optional)
DC input for charging internal battery
Status/Alarm Indicators
Power and low battery LED indicators
16 dual-color LED indicators for Line 1 & Line 2
Current status and alarm history for: Signal, code error,
PCM-30, PCM-31, AIS, alarm, CRC detected, any error
Pattern Sync and bit error LED indicators
Test Pattern Generator
General: 1111, 0000, 1010, 100100 (1-in-3), 1-in-4, 1-in-8, 3-in-24, FOX
PRBS: 2n-1, n=6, 7, 9, 11, 15, 20, 23
Selectable QRS or 220-1 ITU
Conforms to ITU-T O.151, O.152, O.153
Programmable: 10 patterns, 2048 bits long with user definable labels
E1 General
Bit Error Test rates: 2.048 Mbit/s, N (contiguous) and M(noncontiguous) x64 kbit/s (N & M=1 to 31)Full duplex bidirectional hitless in-service drop & insertDrop and insert to internal test circuitry, datacom interface (optional), Nx64 kbit/s test pattern; or 64kbit/s A-law decoded VF channel to built-in speaker/microphone
Automatic configuration
Line Coding: HDB3, AMI
Framing: Unframed, PCM-30, PCM-31, with or without
CRC-4, conforms to ITU-T G.704
Programmable Send Frame Words: Manual/auto E-bits,
MFAS word bit 5, bit 6 (MFAS RAI), bit 7, bit 8, MFAS,ABCD, FAS RAI, Display and Print Send and Receive
FAS/NFAS and MFAS/NMFAS words, auto CRC-4generation, freely settable Sa4, Sa5, Sa6, Sa7, and Sa8bits to 1 or 0 for 8 frames.
Set idle channel code and ABCD bits
